The Magic of Three Layers

Peter

Skip to section:

    How TopCoat F11 Works

    You’ve already heard how awesome TopCoat® coatings like F11® are for your vehicle.

    Maybe you’ve even used them for yourself already.

    But did you know that the magic really happens when you add that third layer of F11®?

    Here’s why…

    Over time things like weather, road conditions, and even other products that you use to clean your car can cause microscopic damage to your paint.

    These show up in the form of swirl marks or spiderwebs in your finish.

    While F11® can’t fill in large deep scratches in your finish, it can begin to restore these microscopic scratches.

    This is what gives your finish that gorgeous, mirror-like depth of shine and slick, clean feel.

    Layer One 

    Think of this as a magnified cross-section of your vehicle’s finish.

    Those ridges that look like mountain peaks are the tiny scratches in the paint – the swirl marks or spiderwebs that we talked about earlier.

    You can see the first layer of TopCoat F11® is beginning to fill in those scratches, but a layer of F11 is very thin, so it can’t totally fill the deepest parts.

    The unscratched areas of your paint may look amazing, even after a single coat, but you might notice something else as well…

    The scratches that didn’t get filled all the way in may seem more obvious now.

    But this is a good thing…

    You see, F11® is a professional-level detailing product, and to get professional results, you have to be able to see which areas of your vehicle need more work.

    You have to bring out the imperfections so you can fix them.

    Once you’ve done this, wait 24-48 hours for the initial layer to fully cure, and then you can add…

    Layer Two

    Now this coating of F11® is starting to restore those deeper parts of the spiderweb even more. 

    They may not be completely filled in, but they’re getting closer.

    But something else is also happening… 

    The new layer of TopCoat F11® is bonding to the first layer that you applied.

    This makes the coating a little thicker and gives you an enhanced layer of protection.

    The proprietary formula of F11® allows this chemical bond to take place (PolyWash® also facilitates this bonding process if you used it to wash your vehicle first).

    Now the areas that didn’t need as much work before are smoother, slicker, and looking even more amazing.

    Once again, wait 24-48 hours for this layer to fully cure and then you can add…

    Layer Three

    Finally! The moment we’ve been waiting for!

    This third coat of F11® has completely filled the microscopic swirl marks in your finish.

    This obviously makes your vehicle look amazing (in fact, the enhanced color and depth of shine are pretty unbelievable, and it’s consistent across the entire surface).

    But there are additional benefits to this as well.

    Despite being tiny, the spiderwebs I mentioned before can grow into full-blown scuffs, scratches, and corrosion of your finish over time. 

    By restoring them with F11®, you delay this process (and you can fight it off for a long time if you add new layers of F11 every 2-4 weeks).

    But not only that, you should find that your vehicle is much easier to clean.

    Dirt, road grime, and even bugs just wipe right off with a wet microfiber towel.

    Water beads up and rolls right off.

    And you can’t stop looking at your vehicle!

    That’s the magic of Three Layers 

    But don’t just take our word for it, be sure to try it for yourself.

    The process is simple:

    Give it a try today and prepare to be amazed!

    Don't Fall For Counterfeits, Get TopCoat - Shop Now
    Don't Fall For Counterfeits, Get TopCoat - Shop Now